Borehole Flushing - What Causes Borehole Siltation and Why You Need To Flush Your Borehole!

At Harare Boreholes, we once completed an interesting project where initially our client suspected that the aquifer was running dry, as the borehole output had dropped off and the pump was sucking air. 

Due to the location of the site and knowledge of the ground conditions, we suspected that the fault was more than likely due to the PVC bore screen having become blocked and silted up.

So once our client had contacted us, with our Operation Manager's vast knowledge of hands-on engineering skills, he devised a method to desilt the bore and clean the bore screen section. As soon as our engineers arrived on site they immediately realised that our suspicions were, in fact, correct, as all around the borehole entrance and surrounding area was a fine film of silt. 

Borehole Flushing in Zimbabwe - What Causes Borehole Siltation and Why You Need To Flush Your Borehole!

We flushed the Borehole and within a short period of time, it was obvious that our plan was going to be successful, as we had removed quite a large volume of silt from the borehole increasing the yield. 

The more silt we removed the greater the yield.

Once this process was completed a new pump was installed and the bore test pump. Our client was ecstatic as they had started to consider that it was going to be necessary to drill a new borehole water supply. 

If you are experiencing similar problems then contact us for further advice, we would be more than happy to offer our services.

Borehole Flushing: Borehole Flushing is needed when the pores of the aquifer inside the borehole get clogged by slit and sand-sized particles or mineral deposits reducing the permeability of the aquifer making it difficult to pump water, thus reducing the water yield. 

This can happen over the course after prolonged usage of a borehole for years or it can happen quickly after just a couple of years depending upon a variety of factors. 

These particles that deter the water flow, may reduce the water yield, change its odour, colour, or even taste and hence must be removed as soon as possible to improve the water yield and quality. And this is where our Borehole Flushing Services in Zimbabwe come in.

Borehole Flushing In Zimbabwe

We can help you accomplish this quickly and efficiently at an affordable price point.

At Harare Boreholes, we use high-pressure water injection procedures with advanced air compressors and flushing tools. Compressed air is passed into the borehole clearing out all the silt and sand, raw dust, decayed particles, mineral deposits, and other extraneous particles that are causing the borehole to clog. 

The borehole flushing process is continued until all the particles are cleared and a clean stream of water is pumped out of the borehole. After a borehole is thoroughly flushed you can enjoy a clean and boosted water yield that continues for years.

ProWater Solutions Zimbabwe Has Extensive Coverage Around Zimbabwe.
We also have a substantial presence and exprerience in Borehole Siting and Borehole Drilling, Borehole Installation and Solar Systems.
Please Call Us On +263 77 389 8979 or +263 71 961 3479.

Please Note: If you are interested in getting Expert advice on Borehole Drilling and Borehole Installation in Zimbabwe, we provide that information for FREE here at ProWater Systems Zimbabwe. So feel free to get in touch with us to discuss your project by calling or sending a WhatsApp message.

ProWater Sales 1: +263 77 389 8979
ProWater Sales 2 +263 71 961 3479.

ProWater Solutions makes no representations or warranties express or implied in relation to this website or the information and materials provided on this website.

ProWater Solutions shall not be responsible for, and disclaims all liability for loss, injury, expense or damage (whether direct or consequential) of any nature whatsoever which may be suffered as a result of or which may be attributable, directly or indirectly, to the use of or reliance upon any information, links or services provided through this website.

ProWater Solutions reserves the right to in its absolute discretion to modify, upgrade, update, suspend or withdraw this website or any part thereof at any time.

ProWater Solutions Through Borehole Drilling In Zimbabwe links you to the best borehole drilling service providers in Zimbabwe.

These service providers can assist you right from initial consultancy up to the drilling itself. Request ProWater Solutions Services from the comfort of your home – through the ProWater Solutions WhatsApp Number: on +263 77 389 8979 or +263 71 961 3479.

ProWater Solutions Zimbabwe is your premier choice for all your water well drilling needs. Our team of highly trained and experienced drillers and water technicians have a proven track record of delivering quality results. We take pride in our excellent safety and performance records, which have earned us a reputation as a reliable and trusted service provider.

With our customer-centric approach and state-of-the-art equipment, we are equipped to handle any type of water well drilling job with precision and efficiency. Our commitment to customer satisfaction is evident in the high level of success we have achieved in our projects.

Contact us today for a quote and let us exceed your expectations with our exceptional services - +263 77 389 8979 and +263 71 961 3479.